Yueqing Open Imp.&Exp. Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Adam John
  • Company Name : Yueqing Open Imp.&Exp. Co., Ltd.
  • Tel : 86-577-62739822
  • Fax : 86-577-62738370
  • Address : Zhejiang,Yueqing,Sulv Industrial Zone, Liushi, Yueqing City, Zhejiang Province. China
  • Country/Region : China
  • Zip : 325604

ZT-25-200 Cable Accessories

ZT-25-200 Cable Accessories
Product Detailed
Related Categories:Other Wires
Live monitor test points can be installed or failure indicator to check equipment status and fault status of charged

25kV 200A plug cable connector is fully insulated, fully sealed can be electrically charged head touch the plug-in terminals, are widely used in outdoor distribution transformer, the American box changes, ring cabinet, cable branch box, underground transformers and other electrical devices. Installed in the T-II cable head 200A of the outlet side, 200A rafts and American mother, single-pass variable box (or double-pass) and the load adapter tube fittings, etc.. Live monitor test points can be installed or failure indicator to query the device charged state and the malfunction. The use of high quality EPDM (ethylene propylene diene rubber) insulated, conductive rod connectors with arc material, it can operate in electric mode, but can not cut short-circuit current; can be used as load switches breaking current 200A. Applicable to 25kV cable cross-section 35 mm2 ~ 120 mm2 of cross-linked polyethylene cable

The main parameters         KV
Rated voltage25
Maximum phase voltage26.3
The maximum relative voltage15.2
Voltage Withstand54/1Minute
15 minutes neglect.the78
Lightning shock pressure125
The minimum corona starting voltage19

The main parametersExplain
Rated Current200A
Breaking current14.4KA,200A,Operation 10
Short-time withstand current10KA/0.17S 3.5KA/3S
 3.5KA/3S

1, insulation layer: The formula and unique hybrid technology to ensure high quality prefabricated quality EPDM rubber insulation 2, the operation ring: one molded part with a stainless steel spring clips fixed-point operation 3, the voltage test point: used to test whether the live circuit indicator needs and charged with 4, within the semi-conductive layer: conductive rubber EPDM pre-effective control of electrical stress 5, outside the semi-conductive layer: conductive EPDM rubber precast cable shield and the shield with the realization of continuous, and that outside in the ground state of semi-conductive layer 6, insert the rod arc: tinned copper rod with a conductive arc function, use the knife provided with the box-shaped wrench to screw the connector into the conductive 7 crimp terminals: cable material according to different choices copper crimp terminals or copper-aluminum crimp

ZT-25-200 Cable Accessories



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.